Speco Technologies VM-1401C - Manual

VM-1401C
14” Color Monitor with Audio
Specifications
Resolution
Horizontal
420 lines
Vertical 380 lines
Linearity Horizontal 10% maximum
Linearity Vertical 10%
Front Control Power switch On/Off rocker switch
Color/Contrast/Bright/Tint (NTSC only):
rotary control - Volume: rotary switch
Electrical Input Voltage 96~256 Vac, 50Hz/60Hz
Power Consumption 40W
Input Signal 0.5 to 2.0 Vp-p composite video,
negative synchronization Y:1.0 Vp-p, C:0.7 VP-p
Input Impedance 75 ohms or high (switchable)
Bandwidth 6 MHz
Video Gain 30 db
Operation System
NTSC
525 lines, 60 fields/sec
PAL 625 lines, 50 fields/sec
Connections
Video (In/Out)
BNC x 2, S-VHS x 1
Audio (In/Out) RCA Jack x 2
Audio Input Signal 10~150m Vp-p
Audio Amplifier 1W/8 ohm (Incl. a speaker)
Environmental Operation Temperature 14 to 122˚F
Storage Temperature -4 to 158˚F (30-90%RH)
General Construction Steel cabinet with plastic front panel
Dimensions 12.5”L x 14”W x 12.6”H
Weight (per unit) 20 lbs.
Certifications UL, CE, CSA FDA, FCC, CUL, TUV
Specifications subject to change
For more information contact us at:
Speco Technologies 200 New Highway, Amityville, NY 11701 Web: www.specotech.com
Toll Free: 1-800-645-5516 In Metro NY: 631-957-8700 Fax: 631-957-9142 or 631-957-3880
Our high performance 14” color monitor offers
420 lines of resolution. It features one camera
input, 1 audio input, a hi/lo impedance switch, up
front controls, and a composite video with loop
through. The monitor provides crisp, clear images
that allow you to observe details even in smaller
video inset boxes common on quad and multiplex-
er displays. It is UL and CSA listed.