State Industries Sandblaster SCESS00308 - Manual (Page 4)

C O M M E R C I A L
Reading Sandblaster Electric Water Heater Model Numbers
©2008 State Water Heaters Printed in U.S.A.
In keeping with our policy of continuous product improvement, specifications are subject to change without prior notice.
For complete details on Commercial Water Heater Warranties, contact State Water Heaters or your State Sales Representative.
Sandblaster Electric Sample Specifications
The heater(s) shall be Sandblaster Commercial Electric Model Number as manufactured by State Water Heaters or an approved equal. Heater(s) shall be rated
at kW, volts, phase, 60 cycle AC, and listed by Underwriter’s Laboratories. Tank(s) shall be gallon capacity. Heater(s) shall
have 150 psi working pressure and be equipped with extruded high density anode. All internal surfaces of the heater(s) exposed to water shall be glass-lined with an alkaline
borosilicate composition that has been fused-to-steel by firing at a temperature range of 1400°F to 1600°F. Electric heating elements shall be low watt density with incoloy sheath
and 1˝ screw-in type. Each element shall be controlled by an individually mounted thermostat and high temperature cut-off switch. All internal circuits shall be fused. The outer
jacket shall be of baked enamel finish and shall be provided with full size control compartment for performance of service and maintenance through hinged front panel and shall
enclose the tank with foam insulation. Electrical junction box with heavy duty terminal block shall be provided. The drain valve shall be located in the front for ease of servicing.
Heater tank shall have a three-year limited warranty as outlined in the written warranty. Manufacturer shall supply CSA Certified and ASME Rated T&P Relief Valve.
SPECIAL NOTE: All model numbers appearing on rating plate and carton labels will be compressed.
EXAMPLES: CSB5254IFE; CSB8254IFE; CSB12054IFE.
ADDERS
A = ASME Construction
B = 480 Volt
CSA = Canadian Construction
NC = North Carolina Requirements
X = 208 Volt
Y = 277 Volt (only single-phase)
CAPACITY
52 = 50 gallons
82 = 80 gallons
120 = 119 gallons
THERMOST AT
TYPE
S = Surface
I = Immersion
MODEL NAME
CSB = Commercial Sandblaster
kW INPUT
6 = 6 kW
9 = 9 kW
12 = 12 kW
135 = 13.5 kW
15 = 15 kW
18 = 18 kW
24 = 24 kW
27 = 27 kW
30 = 30 kW
36 = 36 kW
405 = 40.5 kW
45 = 45 kW
54 = 54 kW
WARRANTY
E = 3 Years
FUSED
All Models Fused
C S B 5 2 1 8 S F E
For more information on the Sandblaster® contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SCESS00308
SANDBLASTER
Commercial Electric Water Heaters
197523_SCESS00308.indd 4 197523_SCESS00308.indd 4 8/12/08 4:56:38 PM 8/12/08 4:56:38 PM