Sentry Industries CR105 - Manual (Page 8)

POWER CONNECTION
Plug the AC POWER CORD to the household outlet. Make sure the voltage is
correct for safety purpose and prevent plausible damages to the set.
Connect one 9 volt battery (not included) to the battery terminals in the
BATTERY COMPARTMENT. It maintains the clock function whenever the AC
power is interrupted.
REMARK: The time display will not exhibit during power failure. But the clock
display will continue at the correct time once the main power supply is
resumed.
RADIO OPERATION
1. Set the FUNCTION SWITCH to “ON” position and the ALARM SWITCH to
“RADIO” position.
2. Set the BAND SELECTOR SWITCH to desired AM/FM.
3. Select the desired station with TUNING CONTROL.
4. Adjust the volume level with VOLUME VONTROL.
5. To obtain better FM reception, lay out the FM ANTENNA WIRE to its full
extent. NOTE: Do not connect FM antenna to outside antenna.
6. The radio can be switched off by setting FUNCTION SWITCH to the
“OFF” position.
HOW TO SET THE CLOCK
1. Press the TIME SET BUTTON simultaneously with HOUR SET BUTTON
for hour settings or MINUTE SET BUTTON for minute settings.
TO SET THE ALARM TO WAKE TO RADIO
1. Press the ALARM SET OFF BUTTON simultaneously with HOUR SET
BUTTON for hour settings or MINUTE SET BUTTON for minute settings.
Slide the BAND SELECTOR SWITCH to AM or FM position. Select a
radio station and make sure the volume is set as desired level.
2. Slide the FUNCTION SWITCH to the “AUTO” position. Slide the ALARM
SWITCH to the “RADIO/AUX” position. The ALARM RADIO ICON will light
indicating the alarm is now activated. When the actual time matches the
selected preset alarm time, the radio will automatically turn on for 1 hour
and 59 minutes and then shuts off.
TO SET THE ALARM TO WAKE TO BUZZER
1. Press the ALARM SET OFF BUTTON simultaneously with HOUR SET
BUTTON for hour settings or MINUTE SET BUTTON for minute settings.
2. Slide the FUNCTION SWITCH to the “AUTO” position. Slide the ALARM
SWITCH to the “BUZZER” position. The ALARM BUZZER ICON will light
indicating the alarm is now activated. When the actual time matches the