Sony CLIE PEG-TJ35 - Manual (Page 112)

112
Performing the HotSync
®
operation via a modem
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
5
Adjust the following settings as needed.
• Serial port: Specifies the port for the modem. If you are not sure of the
port settings, check [Modem Properties] ([Phone and Modem Options]
for Windows 2000 Professional/XP) from [Control Panel].
• Speed: Determines the speed at which files/data are transferred. Try
the rate, [As Fast As Possible] first, and adjust downward if you have
any problems.
• Modem: Specifies the modem type or manufacturer. If you are not sure
of your modem type or if you cannot find your modem type in the list,
select [Hayes Basic].
• Setup string: Identifies the setup string for your modem
automatically if you specify the modem type or manufacturer. If it does
not work properly, refer to the manual of your modem.
6
Click [OK].
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the modem HotSync
®
operation.
1
Rotate the Jog Dial™ navigator to select (HotSync) on
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap (HotSync) to display the HotSync screen.
2
Tap [Modem].
Continued on next page
• • • • • • • • • • • • • • •