Sanyo SC-X2015N - Manual

SC-X2015N Instrcution Manual
Vacuum Cleaner
7
Trouble shooting
If you have a problem with your cleaner, consult the handy guide below. If the cleaner
is malfunctioning, do not operate it and please ask for service.
Technical specification
Problem
Cleaner won’t run
Low suction
Cord doesn’t fully rewind
1.Not firmly plugged in
1.Cord twisted or uneven
1.Clogged floor brush,
hose or tube
2.Full of dust in the dust cup
3.Dust cup not in place
4.Clogged the filter
1.Remove the blockage
2.Empty the dust cup
3.Put the dust cap in place
4.Clean or replace the filter
1.Plug unit in firmly
1.Pull out the cord and rewind
Possible cause Possible solution
Rating Voltage 230 240V - Power 1800-2000W
Rating Frequency 50Hz
4.5m
Dust Capacity 1.5L
Power Cord Length