Samsung COMPACT SPD-1000 - Manual (Page 21)

41 40
COLOR : Output images are displayed in colour all the time. Burst signal size can be adjusted.
B/W
: Output images are displayed in black and white all the time. Burst signal
can be kept or removed.
AUTO : Under day condition, the mode is automatically changed into the COLOR
mode to keep an optimum colour. At night, the mode is automatically
changed into the B/W mode to distinguish dark images clearly.
Functional Description
The darkness level is detected automatically under low light conditions such as
at night or under dark light to keep the screen bright and clear.
Day & Night
• If the AGC is in OFF mode, the Auto mode cannot be used. Only COLOR or B/W
mode can be used.
• If the sunlight or halogen lamp is used in B/W mode, the focus may be blurred
compared with the general illumination.
Notes
Sync: Internal Sync is selected by default.
Internal : Internal synchronization
Image Adj. : Clarity of the video signal and saturation of the color may be
adjusted.
Sharpness : The overall sharpness of the image can be adjusted.
Color : The overall colour density of the image can be adjusted.
Freeze : Moving image can be stopped and replayed.
ON : Image can be frozen.
OFF : Frozen image is released and the film is replayed.
Position : Select the installation direction of the camera.
Ceiling : When the camera is installed on the ceiling
Desktop : When the camera is installed on the table
Others
Camera Setting
Focus
White Balance
ATW(O)
Exposure
Back Light
OFF
AGC NORMAL
SSNR LOW
Day & Night AUTO
Others
Camera Setting
Focus
White Balance
ATW(O)
Exposure
Back Light
OFF
AGC NORMAL
SSNR LOW
Day & Night COLOR
Others
Camera Setting
Focus
White Balance
ATW(O)
Exposure
Back Light
OFF
AGC NORMAL
SSNR LOW
Day & Night B/W
Others
Ohter
Sync INTERNAL
Image Adj
Freeze
OFF
Position Ceiling
Camera Setting
Focus
White Balance
ATW(O)
Exposure
Back Light
OFF
AGC NORMAL
SSNR LOW
Day & Night COLOR
Others