Stopping a restore, Saving a folder – Seagate Server User Manual
Page 88
Mirra Manual for Windows
Release 2.2
80
Step 4:
If your folder was password protected, enter your Access Password in the
Password Required window and click OK.
Step 5:
Select a location for the folder in the Browse for Folder window and click OK.
The folder is restored at the selected location.
Step 6:
Repeat Steps 3 through 5 until all your folders have been restore on your
new computer.
Step 7:
Select the restored folders for backup (see
Selecting Folders for Backup
).
Step 8:
Once you confirm that each folder has been completely restored and
backed up, delete the static copy from the Mirra to avoid confusion and
redundancy.
Stopping a Restore
To stop restoring a folder,
Step 1:
On the Backup & Restore screen, select the folder being restored.
Step 2:
On the Restore Tasks menu, click Stop Restoring.
Saving a Folder
To save a folder,
Step 1:
On the Backup & Restore screen, select the folder to be saved.
Step 2:
On the Restore Tasks menu, click Save as.