Siemens WD7005 - Manual (Page 11)

9
WD7005 1000
1200 Silver WD7205
800
800
600
600
800
800
800
800
800
800
800
800
The first row of symbols and the progress bar below form
the program status display. The progress bar consists of
a frame and several segments.
Overdosage The automatic safety system detects excessive froth in the
appliance due to a highly frothing detergent or an overdo-
sage At the end of the programme this is indicated in the
display field by the symbol. Dispense less detergent for
the next wash with similar items of washing(same degree
of soiling and wash load).
Programme status
display
The symbol goes out when the appliance switch-
es off at the end of the programme or if the programme
is changed.
Childproof lock The activated childproof lock prevents the selected prog-
ram from being changed while the programme is running,
see page 25.
Maximum load
When the programme has been selected, the symbols
for the individual programme sections are displayed.
The frame of the progress bar flashes and requests
the programme to start.
When the programme has started, the almost empty bar
is displayed which fills up with segments from left to right
while the programme is running. The symbols indicatethe
programme sections which have not yet run and go out
when th e particular programme section has run.
At the end of the programme all symbols have gone out
and the progress bar is full.
Overdosage of detergent may cause excessive froth forma-
tion and impair the washing and rinsing results. A rinse
cycle is automatically run.
The maximum wash/dry load is displayed depending on
the selected programme and additional functions,
see page 39.
Spin speed The maximum spin speed is displayed depending on the
selected programme and additional functions.
The fan works at the last 10 minutes of drying duration for
cooling the laundry.
Do not interrupt this cooling process.
Fan
cottons easy-care delicates wool rinsing washing spinning
model
Progra
-mme
M
a
. S
in
x
p
sp
e
(rp
m
)
e
d