Siemens WD7005 - Manual (Page 21)

19
Frequent use of insufficient detergent will eventually
become noticeable as followings:
- washing appears grey or not properly clean
- grey-brown stains (grease marks) form on the
washing
Too much detergent results in:
- unnecessarily high environmental pollution
- due to the generation of too much foam, the
washing is hard
-ly agitated which leads to poor washing results.
The amount of detergent indicated on its packaging
refers to a full machine load.
For small loads or less soiling, reduce the amount
of detergent.
Filling laundry detergent
and/or additive
dispensers
- Do not fill beyond the Max mark, otherwise will
be flushed o the machine together with the
detergent at the start of the programme.
- If the liquid additive is thick, mix with a little water
before dispensing (prevents clogging of the overflow).
Pull out the detergent dispenser up to the end stop.
Add the detergent and/or additive.
Close the detergent dispenser.
, , ,,
Dispenser I:
Detergent for prewash or starch.
Dispenser II:
Detergent for main wash, water softener, pre-
soaking agent, bleach and stain removal product.
Detergent
Cleaning product, e.g. Fabric softener or fabric
conditioner (do not fill above the lower edge of
the insert 1).