Siemens WD7005 - Manual (Page 46)

B B
A A
D D
C C
44
Removing the
transport bolts
The transport bolts must always be removed before
using the appliance for the first time and must be
retained for any subsequent transport (e.g. When
moving) Use the spanner provided only if a ring
spanner is unavailable.
If not all parts have been removed and have falled
into the button of the washer-dryer: open the door,
pull the drum forwards slightly, reach in and remove
the parts.
Loosen all four transit bolts with the wrench until
they are freely movable.
Insert the covers.