Smeg STC700 - Manual (Page 14)

User instructions
13
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
CANCELLING THE CURRENT PROGRAM
• To cancel the currently selected program, open the door and hold
down the PROGRAM SELECTION (3) button for a few seconds until
the indicator lights for programs 4 and 5 illuminate simultaneously.
•
Close the door.
• After approximately 1 minute the dishwasher will advance to the end
of cycle.