Sennheiser EK 500 - Manual (Page 16)

16
Working with the operating menu
By way of example of the “ TUNE ” menu, this section
describes how to use the operating menu.
After switching the transmitter on, the standard display is
shown on the display panel.
Getting into the operating menu
̈
Press the SET button to get from the standard display
into the operating menu. The last selected menu flashes
on the display.
Selecting a menu
̈
Press the
̆
/
̄
rocker button to select a menu.
̈
Press the SET button to get into the setting mode of the
selected menu. The current setting that can be adjusted
flashes on the display.
Adjusting a setting
̈
Press the
̆
/
̄
rocker button to adjust the setting.
By briefly pressing the
̆
/
̄
rocker button, the display
jumps either forwards or backwards to the next setting.
In the “
CHAN ”, “ TUNE ” and “ NAME ” menu, the
̆
/
̄
rocker button features a “fast search” function. If you
hold down a button, the display cycles continuously,
allowing you to get fast and easily to your desired
setting.