Samsung VP-D451 - Manual (Page 55)

✤ The Wind Cut function works in both Camera and Player
(Audio dubbing) modes.
Use the Wind Cut when recording in windy places such as the
beach or near buildings.
✤ The Wind Cut function minimizes wind noise or other noise while
recording.
-
When the wind cut is on, some low pitched tones sounds are
eliminated along with the sound of the wind.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE.
(VP-D453(i)/D454(i)/D455(i) only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to
select Record, then press the Menu selector.
5. Move the Menu selector to the left or right to
select Wind Cut, then press the Menu selector.
6. To activate the Wind Cut function, move the
Menu selector to the left or right to select On,
then press the Menu selector.
7. To exit, press the MENU button.
■ Wind Cut ( ) icon will be displayed.
[ Note ]
Make sure Wind Cut is set to off when you want the
microphone to be as sensitive as possible.
Advanced Recording
Cutting Off Wind Noise (Wind Cut)
ENGLISH
55 55
✤ Camera Player
Wind Cut
Wind Cut
✤ Wind Cut
- Wind Cut
1. CAMERA PLAYER
2. TAPE
( VP-D453(i)/D454(i)/D455(i))
3. MENU
■
4. Menu selector
Record Menu selector
5. Menu selector
Wind Cut
Menu selector
6. Wind Cut
Menu selector On
Menu selector
7. MENU
■ Wind Cut
Wind Cut
Wind Cut
Move Select Exit MENU
Camera Mode
Back
Rec Mode
Audio Mode
Wind Cut
Camera Mode
√Record
Rec Mode
Audio Mode
Wind Cut √SP
√12Bit
√Off
Move Select Exit MENU
Off
On
4
6
60min
0:00:10 SP STBY 7
œ