SBC comm SBC-116 - Manual (Page 15)


Function Operations
To adjust OFF HOOK light time: While in the BACK LIGHT mode press or and the
LCD will display “OFF HOOK LIGHT” - When the LCD shows “OFF HOOK LIGHT”. Press
the ENTER then or button to select if you would like the BACK LIGHT to remain
illuminated ALL THE TIME or FOR SECONDS (time chosen for the BACK LIGHT time). After
selecting, press ENTER to confirm, then press MENU to exit.
TALKING CID SETTING
Talking Caller ID is ON by default. To turn off Talking Caller ID, press MENU then press
the or button to select SET TALKING CID and press ENTER. Choose VOICE
TALKING and press ENTER. Then press the or button and choose OFF. Press the
ENTER button to confirm and the MENU button to exit.
Talking Caller ID (TCID)
This feature allows you to know who is calling without looking at the display. When a
call comes in, the phone will announce the caller’s name displayed on the LCD after the
second ring. To use this feature, you must subscribe to your telephone company’s Caller
ID service. If a call is received from an area or system where name display service is not
available, “Number available” will be announced.
Please note:
• TCID announcement is heard after the second ring and between every ring thereafter.
• Caller ID supports names of up to 15 letters. If the caller’s name has more than 15
letters, the name will not be displayed or announced correctly.
• If you subscribe to a distinctive ring service (such as IDENTA-RING), your unit may
mute one or more of the rings in order to announce the name of the caller.
• When you receive a call while on the phone, the 2nd caller’s name will not be
announced.
CALL FROM
When a call is received, the phone will announce “Call from...” before the CID. This
feature is ON by default. To turn off the “Call from...” announcement, press MENU
then press the or button to select SET TALKING CID and press ENTER. Choose
CALL FROM and press ENTER. Then press the or button and choose OFF. Press
the ENTER button to confirm and the MENU button to exit.
TALK VOLUME
To turn adjust the volume of the TCID announcement, press MENU then press the or
button to select SET TALKING CID and press ENTER. Choose TALK VOLUME and
press ENTER. Then press the or button to set the TCID volume level between
four levels. Press the ENTER button to confirm and the MENU button to exit.
Note: You can also adjust the TCID volume by pressing the buttons while the
phone is in standby mode.