Sony BDV-F7 - Manual (Page 17)

17 US
Ge
tting Star
te
d
Step 2: Connecting the System
For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are made.
Note
• When you connect another component with a volume control, turn down the volume of the other components to a
level where sound is not distorted.
To remove the panel cover of the unit
Before connecting the cables, remove the panel cover from the unit.
Note
• Before using the unit, remove the seal attached at the lower rear of the unit.
Hold the panel cover at (A), then slide it out to
the side.
A