Others – Sony BDP-S380/S383 User Manual

Page 22

Advertising
background image

F:\SD0001_A1\DATA\01GB-

BDPS380\GB_070ADD.fm

master page=left

specdef20090918

BDP-S380/S383

4-261-092-11(1)

22

The System Power-Off function does not
work (BRAVIA Sync).

, Check that [Control for HDMI] and

[HDMI: Linked to TV-off] are set to [On]
(page 18)
.

Playback does not start from the
beginning of content.

, Press OPTIONS, and select [Play from

start].

Playback does not start from the resume
point where you last stopped playing.

, The resume point may be cleared from

memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.

The disc tray does not open and
“LOCKED” or “TLK ON” appears on the
front panel display.

, When “LOCKED” appears, the player is

locked. To cancel the Child Lock, hold
down N on the player until “UNLOCK”
appears on the front panel display (page 6).

, When “TLK ON” appears, contact your

Sony dealer or local authorised Sony
service facility.

The disc tray does not open and you
cannot remove the disc even after you
press
Z.

, Try the following: 1Turn the player off,

and disconnect the mains lead.
2

Reconnect the mains lead while pressing

down Z on the player. 3Keep pressing
down Z on the player until the tray opens.
4

Remove the disc. 5When “OPEN”

appears on the front panel display, hold
down [/1 on the player for more than 10
seconds until the player turns off.

“Exxxx” or “TEM ERR” appears on the
front panel display.

, When “Exxxx” appears, contact your

nearest Sony dealer or local authorised
Sony service facility and give the error
code.

, When “TEM ERR” appears, place the

player in a location with adequate
ventilation to prevent heat build-up in the
player.

The player does not respond to any button.

, Moisture has condensed inside the player

(page 3).

, Hold down [/1 on the player for more than

10 seconds until the indicators on the front
panel display turn off.
If the player still does not respond to any
button, disconnect then reconnect the mains
lead.

Others

Advertising