Sony Ericsson DVP-NS708H - Manual (Page 17)

17
H
o
o
kups
• When you connect the player to your TV via the
SCART jacks, the TV’s input source is set to the
player automatically when you start playback. In
this case, press t (TV/video) on the remote to
return the input to the TV.
• If you set “LINE” in SCREEN SETUP to “RGB
(COMPONENT OFF)” (page 58), the player
outputs no component video signals.
• Be sure to disconnect the HDMI cord when
moving the player.
• Do not apply too much pressure to the cabinet
wall, if you place the player on the cabinet with
the HDMI cord connected. It may damage the
HDMI OUT jack or the HDMI cord.
• When connecting or disconnecting, do not screw
in or rotate the HDMI connector.
About the CONTROL FOR HDMI
functions for ‘BRAVIA Sync’
(for HDMI connections only)
By connecting to Sony components that are
compatible with the CONTROL FOR HDMI
function with an HDMI cord (not supplied),
you can enjoy the following features:
• One-Touch Play (page 24)
• System-Power Off
When you turn the TV off by using the [/1
button on the TV’s remote, the components
compatible with CONTROL FOR HDMI
function turn off automatically.
To prepare for the ‘BRAVIA Sync’ features
Set “CONTROL FOR HDMI” to “ON” in
“HDMI SETUP” (page 63). For details on
TV setting, refer to the operating instructions
supplied with the TV.
Note
Depending on the connected component, the
CONTROL FOR HDMI function may not work.
Refer to the operating instructions supplied with the
component.
When you play a disc recorded in the NTSC
colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC
colour system and the picture may not
appear on the PAL colour system
televisions. In this case, open the tray and
remove the disc.
VCR
CD/DVD player TV
Connect
directly