Sony PCV-L640 - Manual (Page 29)

Using PC Cards
29
To eject a PC card:
1 From the Start menu, select Settings > Control Panel.
2 Click the PC Card icon.
3 Click the name of the card that you want to eject, and then click Stop.
4 When the message “You may safely remove this device” appears, click OK.
5 Push the PC card eject button on the front panel of the system unit. You may
need to pull out the eject button before you can eject the card.
The card is ejected from the card connector. Remove the card by holding it by its
edge and pulling it out carefully.


When the card is completely inserted, the eject button pops out.if you cannot insert
the card, do not forcibly insert it. In this case, make sure the card is not inserted
upside-down or backward, and then reinsert the card into the slot carefully.
See the manual that came with the PC card for details on using it.
To close the front panel when the eject button is protruding, fold the button down
onto the computer.


If you eject the PC card incorrectly, the system may not work correctly.