Sony 3-285-995-11(1) - Manual (Page 37)

Dis
c
37 GB
x When the current layer is the CD
layer
[SUPER AUDIO CD] appears.
x When the current layer is the HD
layer
[CD] appears.
3
Press to change the layer.
• [SUPER AUDIO CD]: You can play the
HD layer.
When the system is playing an HD layer,
“SA-CD” lights up in the front panel
display
• [CD]: You can play the CD layer.
When the system is playing a CD layer,
“CD” lights up in the front panel display.
Note
• Each play mode function works only within the
selected layer or playback area.
• When you select a CD layer, you cannot change a
playback area.
• Super Audio CD audio signals are not output from the
HDMI OUT jack.
With PBC (Playback Control) functions, you
can enjoy simple interactive operations, search
functions, and other such operations.
PBC playback allows you to play a VIDEO CD
interactively by following the menu on the TV
screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
Select the item number you want using
the number buttons.
3
Press .
4
Follow the instructions in the menu for
interactive operations.
Refer to the operating instructions supplied
with the disc, as the operating procedure
may differ depending on the VIDEO CD.
To go back to the menu
Press O RETURN.
Note
• Depending on the VIDEO CD, [Press ENTER] in
Step 3 may appear as [Press SELECT] in the
operating instructions supplied with the disc. In this
case, press H.
Tip
• To play without using the PBC function, press ./
> or the number buttons while the system is in stop
mode to select a track, then press H or
. The
system starts playback. You cannot play still pictures
such as a menu. To return to PBC playback, press x
twice, then press H.
When you stop the disc, the system remembers
the point where you pressed x and “RESUME”
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system is set to standby mode
by pressing "/1.
1
While playing a disc, press x to stop
playback.
“RESUME” appears in the front panel
display.
2
Press H.
The system starts playback from the point
where you stopped the disc in Step 1.
Note
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing may be cleared
when:
– you eject the disc.
– the system enters standby mode (DATA CD/
DATA DVD only).
– you change or reset the settings on the Setup
Display.
– you change the parental control level.
Playing a VIDEO CD with PBC
functions (Ver.2.0)
(PBC Playback)
Resuming playback from the
point where you stopped the
disc
(Resume Play)