Controlling the tv with the supplied remote, Preparing the remote for controlling the tv, Controlling the tv with the supplied – Sony 3-285-995-11(1) User Manual

Page 83: Remote

Advertising
background image

O

the
r O

p

erati

ons

83

GB

– the headphones are connected to the unit or

surround amplifier.

– the calibration mic is not connected.

– front speakers are not correctly connected.

– surround speakers are not correctly

connected.

– front and surround speakers are not correctly

connected.

10

Press

C/c to select [YES] or [NO], then

press .

x The measurement is OK.

Disconnect the calibration mic, then select
[YES]. The result is implemented.

x The measurement is not OK.

Follow the message, then select [YES] to
retry.

Note

• While the Auto Calibration function works:

– do not turn off the power.

– do not press any button.

– do not change the volume.

– do not change the function.

– do not change the disc.

– do not insert or eject a disc.

– do not connect the headphones to the unit or

surround amplifier.

– do not disconnect the calibration mic.

• The measurement for [SUBWOOFER] is always

[YES] since the system does not perform subwoofer
calibration.

Tip

• You can check the distance between the listening

position and each speaker. See page 55.

Controlling the TV with
the Supplied Remote

By adjusting the remote signal, you can control
your TV with the supplied remote.

Note

• When you replace the batteries of the remote, the

code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.

Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV
[/1.

If you successfully set the manufacturer’s code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.

Code numbers of controllable TVs

If more than one code number is listed, try
entering them one at a time until you find the
code that works with your TV.

TV

Preparing the remote for
controlling the TV

Manufacturer

Code number

SONY

501 (default)

AIWA

501

AKAI

503

DAEWOO

503, 506, 515, 544

FISHER

508, 545

GE

503, 509, 510, 544

GOLDSTAR/LG

503, 515, 517, 544, 568

GRUNDIG

533

HITACHI

503, 514, 515, 517, 544, 557,
571

ITT

521, 522

JVC

516

LOEWE

515

MAGNAVOX

503, 515, 517, 518, 544, 566

MARANTZ

527

MITSUBISHI/MGA 503, 527, 544, 566, 568

Advertising
This manual is related to the following products: