Sony CDX-F7710 - Manual (Page 7)

7
E
SCRL (scroll) button 8
To scroll the display item.
F Display window
G OPEN button 5
H
Receptor for the card remote
commander
I GP * 2 /PRESET +/– buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
J OFF button
To power off/stop the source.
K
EQ7 (equalizer) button
To select an equalizer type (Xplod, VOCAL,
CLUB, JAZZ, NEWAGE, ROCK, CUSTOM
or OFF).
L SOURCE button
To power on/change the source (Radio/CD/
MD*
3 /AUX* 4 ).
M Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
3 :
(1): REP 8
(2): SHUF 8
(5): BBE MP * 5 * 6 3
To activate the BBE MP function, set “BBE
MP on.” To cancel, set “BBE MP off.”
(6):
PAUSE * 6
To pause playback. To cancel, press again.
N DSPL (display) button 8, 10
To change display items.
O
IMAGE button 2
To select the display image.
Space Producer mode
t Wall paper mode
1-3 t Spectrum analyzer mode 1-5 t
Movie mode 1-3 t normal play/reception
mode
P RESET button 4
Q Z (eject) button 5
To eject the disc.
R
Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
ql MENU button
To enter menu.
w; ENTER button
To complete a setting.
wa < ( . )/ , ( > ) buttons
To control radio/CD, the same as (SEEK) –/
+ on the unit.
ws VOL (volume) +/– button
To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf SOUND button 9
To select sound items.
wg LIST/CAT * 7 button 9, 12
To list up.
wh M (+)/ m (–) buttons
To control radio/CD, the same as
(GP/PRESET) +/– on the unit.
*1 When a CD/MD changer is connected.
*2 When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 12.
*3 When an MD changer is connected.
*4 When an optional Sony portable device is
connected.
*5 The unit only.
*6 When playing back on this unit.
*7 When the XM tuner is connected.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.