Samsung SYNCMASTER 460TMN - Manual (Page 21)

Note
This function is only enabled if the Color Tone is set to Off.
Image Lock
Note
• This function does not work for this LCD Display.
Image Lock is used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
(Available in PC mode only)
(Not available in Dynamic Contrast mode of On.)
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock]
Coarse
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → ENTER
→
[Coarse]
→ , → ENTER
Removes noise such as vertical stripes. Coarse adjustment may move the screen image
area. You may relocate it to the center using the horizontal control menu.
Fine
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → →
ENTER → [Fine]
→ , → ENTER
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
H-Position
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → →
→
ENTER → [H-Position]
→ , → ENTER
Adjusts the screen location horizontally.
Adjusting the LCD Display
20