Samsung HT-DS690 - Manual (Page 24)

• Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash
alternately.
• You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs. See page 65 for more information on the
operation of the remote control.
Press MODE button.
To Operate the TV and DVD Player with a Single Remote Control
2 3
Press the MODE
button so that the TV
indicator on the
remote control flashes.
TV DVD RECEIVER
TV DVD RECEIVER
Press the POWER
button to turn on
the TV.
5 6
Press the MODE button so
that the DVD RECEIVER
indicator on the remote
control flashes.
Press DVD button
to select DVD/CD
mode.
23
Before Using Your DVD Player
Your DVD player is capable of playing DVD, CD, MP3 and JPEG discs.Depending on the disc you
are using, these instructions may vary slightly. Read the instructions carefully before using.
1 Plug the power
cord into the AC
power supply.
4 Press TV/VIDEO
button to select
VIDEO mode.
1p~42p(DS690)-SEA 9/15/04 5:00 PM Page 26