Assembly – Silvercrest SEKU 2000 A16 User Manual
Page 13
Advertising
12
Assembly
SEKU 2000 A1
GB
IE
Step 5
Place the fl oor plate
7
on the fl oor.
Now take the previously assembled unit and carefully place it on the fl oor plate as shown in the following
diagramme.
Then screw together the assembled unit with the connection blocks
G
on the fl oor plate
7
. For this, use
8 screws of the type
A
. (2 screws per connection block).
Step 6
Take the top covering panel
3
and place it on the preassembled unit.
Secure the top covering panel
3
from the inner side of the unit with 7 screws of the type
A
.
G
A
A
G
A
3
Advertising