Connections – Sima Products Color Corrector SCC-2 User Manual
Page 4
Color Corrector Model SCC-2 User Manual
4
Connections
To Connect SCC-2:
1.
Connect either Composite or S-video Output from playback VCR/DVD to one of the Composite
or S-video inputs on SCC-2
2.
Connect either Composite or S-video Output from SCC-2 to one of the Composite or S-video
inputs on recording VCR/DVD
3.
Connect AC/DC adapter to power jack on SCC-2. Plug adapter into standard 120V AC outlet
Operation
After connecting the SCC-2 to a playback and recording device,
Power/Standby Select:
When the power adapter is plugged in, the SCC-2 enters a Standby mode. The red
Power/Standby LED will be illuminated.
To turn the unit on, Press the Power button. The Standby LED goes off and an input indicator light
corresponding to the selected input will be lit
.
Press the Power button again to re-enter into Standby mode.
Note: To entirely turn off the power for the unit, unplug the power adapter.
Input Source Select: Select one of four inputs as video input source
Input 1 button: Press to select composite video 1 as input source
Input 2 button: Press to select composite video 2 as input source
Input 3 button: Press to select S-Video 3 as input source
Input 4 button: Press to select S-Video 4 as input source
1
2
3