Sceptre Technologies LCD Monitor X9S-NagaV - Manual (Page 15)

11 Rev.1
text and graphic display modes.
PORT-SELECT:
To switch between analog and DVI port for PC signal
input
EXIT:
To exits the Monitor-Control submenu
OSD-control
The OSD-Control menu lets you adjust the position of the
OSD on the screen. Press the Adjustment control button to
display the submenu.
OSD-H-POSITION:
To change the position of the OSD on a horizontal plane.
OSD-V-POSITION:
To change the position of the OSD on a vertical plane.
OSD-TIMER:
The OSD menu display time can be set at 5, 10, 15,
20, 25 or 30 seconds.
EXIT:
To exit the OSD-Control submen u.