Star Micronics Dot Impact Printer - Manual (Page 25)

3-17 STAR Command Specifications
Rev. 0.70
3-3-4 Line Spacing
LF
[Name] Line feed
[Code]
ASCII LF
Hexadecimal 0A
Decimal 10
[Defined Area] ---
[Initial Value] Set line feed to 1/6 inch
[Function] After printing data in the line buffer, paper is fed according to the currently set line feed amount.
CR
[Name] Carriage return (Print line feed)
[Code]
ASCII CR
Hexadecimal 0D
Decimal 13
[Defined Area] ---
[Initial Value] Set line feed to 1/6 inch
[Function] Specifies the function according to the memory switch value.
Memory SW Function
Condition (1) Ignored
Condition (2) Same as the <LF> code.
Condition (3) Executes only printing, with no paper feed.
See each printer’s product specifications manual for details on the memory switch settings.