Suzuki 57L1F001 User Manual

Page 61

Advertising
background image

2-42

BEFORE DRIVING

57L20-03E

Flow chart

57L21044

Reminder 1 – 3
For each reminder 1 – 3, the reminder light comes on for about 20 seconds, then blinks for
about 55 seconds. When the reminder light first comes on, a buzzer sounds intermittently
for about 6 seconds.

Engine Switch “ON”

Seat belt is

buckled

30 sec.

Vehicle speed:

increase to 8 km/h

Seat belt is

unbuckled

Vehicle speed:

below 8 km/h

Vehicle speed:

over 8 km/h

Reminder 3

3 min.

No reminder

Seat belt is

unbuckled

Vehicle speed:

below 8 km/h

Vehicle speed:

over 8 km/h

No reminder

Reminder 2

Reminder 1

Driver’s seat belt reminder
If the driver’s seat belt remains unbuckled
after changing the ignition mode to “ON” by
pressing the engine switch, the driver’s
seat belt reminder works as follows:
1) The driver’s seat belt reminder light will

come on for about 20 seconds when
the ignition mode is changed to “ON”
by pressing the engine switch, the
engine switch then will blink for about
55 seconds. When the light comes on,
a buzzer will also sound intermittently
for about 6 seconds (Reminder 1).

2) If the vehicle is driven (vehicle speed >

8 km/h), Reminder 2 will operate about
30 seconds after Reminder 1 has fin-
ished.
If the vehicle is not driven (vehicle
speed < 8 km/h), Reminder 2 will oper-
ate when driving starts (vehicle speed >
8 km/h).

3) Reminder 3 will operate about 3 min-

utes after Reminder 2 has finished.

4) Even if the driver’s seat belt remains

unbuckled after Reminder 3, there will
be no further reminders.

If the driver has buckled his or her seat belt
and later unbuckles the seat belt, the
reminder system will be activated from
Reminder 1 or Reminder 2 according to
the vehicle speed. (Refer to the flow chart.)

The driver’s seat belt reminder will be auto-
matically canceled when the driver’s seat
belt is buckled or the ignition mode is

Advertising
This manual is related to the following products: