Stewart Filmscreen Corp Projection HDTV - Manual (Page 5)

Preparation
Specifications regarding the individual screen dimensions, weight, mounting
type, and controls are provided by the factory when the unit is ordered.
Before beginning the installation:
‹ Check the specifications for the frame and mounting to be used.
‹ Prepare for electrical access.
‹ Check the size and weight of the screen to be installed so that
you can plan for the number of people required for the mounting
procedure. You need at least two people to mount the frame and
attach the screen.
You will need:
‹ Gloves, for handling the screen
‹ Ladders for the personnel supporting the screen during the
mounting process, as needed
‹ A level
‹ Fasteners appropriate for the surface on which the screen is
being mounted
‹ Drills for making holes to attach brackets to the mounting surface,
as needed
‹ Tools for tightening fasteners, including a hex head wrench
Note: Bolts and other fasteners for the screen are standard gauge and
sizes used in the U.S., regardless of where they will be installed. For this
reason, the sizes are expressed in inches rather than metric measurements.
Unpacking
Be sure to unpack carefully in a clean area. Use special care when
handling the screen so that it does not become soiled or damaged.
CineCurve: Owner’s Manual 3
P
REPARING THE
I
NSTALLATION