Shaw digital Phone - Manual (Page 9)

390 Cool Grey 8
With Call Waiting, you’ll know if another
call is coming in when you’re already on
the line. If you have a caller ID phone, the
names and numbers of incoming calls will
be displayed when you are on the phone.
When you are on the phone and someone
else is calling you:
> You’ll hear a single tone when another call is waiting. if
you have Call Waiting with Call display you will hear a
series of tones.
> Press and release the receiver-disconnect button (or
link or flash). Caller #1 is now on hold.
> You can now speak privately to caller #2.
> Press the receiver-disconnect button again (or link or
flash) to return to caller #1.
Note: Call Waiting will not work if a phone
extension is in use. Extension users must
hang up during all switching between calls.
To temporarily cancel Call Waiting:
Before you make a call:
> dial * 7 0 . listen for two beeps.
> listen until no further beeps are heard and
make your call.
> Call Waiting will be restored when you hang up.
What happens when using Call Waiting:
> Callers will hear a normal ring instead of a busy
signal when you are already on the phone. if you have
temporarily turned Call Waiting off, second callers will
hear a busy signal or be routed to your Voicemail, if
you subscribe to Voicemail Services.
> Waiting calls that are not answered will be routed to
Voicemail if you subscribe to Voicemail. You can find
the telephone number of the second call by using the
Call Return service. (See page 8 for more information.)
> if you lose a call, hang up. the phone will automatically
ring and the call will be re-established.
> Call Waiting does not work when you are on a 3-Way
Calling call. Additional callers will be routed to
Voicemail or receive a busy signal.
CAll WAitiNg
7