Sunfire TGR401 - Manual (Page 62)

User's Manual
62
APPENDIX
Using the VIA!migo
The following details show how to
use the VIA!migo to play your iPod
through the TGR-401
1. Press the remote's
MAIN button to make
sure its display is on
main page 1.
2. Press the TG401
device button to set
the remote to operate
your TGR-401. The
remote display chang es
to show the TGR-401
input se lec tions.
3. Press MP3 to select the VIA!migo
as the TGR-401 input. Your TV
monitor (connected to the Mon
Video output of the TGR-401) will
show the VIA!migo menu. This
appears in grey, and shows some
familiar iPod menus and other op-
tions.
The Settings menu shows various
options, such as different screen-
savers that can be applied, album
art on or off, menu language etc.
You cannot navigate through these
menus or select choices until
the remote is set to control the
VIA!migo (see step 5 onwards).
If you press INFO (just above the
navigation buttons) the TGR-401
will show the Title, Artist, Album,
and the surround mode. This will
appear on the TV screen, as well
as the front panel display.
4. To change surround modes, press
INFO until the current mode is
shown, then press the MODE but-
tons on either side of the naviga-
tion buttons until a suitable mode
is found.
5. Press the remote's
MAIN button to make
sure its display is back
on main page 1.
6. Press the MP3 device
button to set the re-
mote to operate your
VIA!migo. The display
chang es to show the
MP3 se lec tions. In
addition to the buttons
around the display,
other remote buttons are used to
control the VIA!migo, as shown
below.
3 1
6 4
9 7
2
EXIT
ENT +10
CH VOL
MUTE PREV
CH
MENU INFO
GUIDE
MAIN FAV
OFF ON
PAGE
SEL
5
8
0
Home
Screensaver Off
Scan + Scan –
Track Skip –/+
Menu Navgation
Menu Enter
Repeat
ShufÀ e Toggle
Screensaver On
Menu Mode Track Skip +
Menu Home
Menu Enter
Song Play/Pause
Power On Power Off
Remote in MP3 mode
Track Skip –
Video Mode
Song Stop
7. If you have a video iPod, use the
VIDMD button to select the video
display. Select MENMD to select
the menu display.
• The VOL buttons and MUTE button
operate the TGR-401, even when
the remote is in MP3 mode.
• The operation of the optional
VIA!migo relies on the navigation
buttons when the remote is set
to operate the MP3. Therefore,
it is best that you do not use the
remote's PUNCH feature with the
MP3, in case you program over
useful buttons (see page 28).
Volume
Mute
Menu Name Choices
MUSIC PLAYLISTS
ARTIST
ALBUMS
SONGS
GENRES
COMPOSERS
AUDIOBOOKS
PODCASTS
PLAYLISTS
MY JUKEBOX
SHUFFLE SONGS
NOW PLAYING
SETTINGS
COLOR THEMES
SCREENSAVERS
SCREENSAVER
TIME
LANGUAGE
ALBUM ART
AUDIO SETTINGS