Sony BDP-CX7000ES - Manual (Page 70)

70
• Subwoofer
b
• Depending on the settings of other speakers, the
subwoofer may output excessive sound.
• If you play a BD or DVD that does not have
subwoofer signal recorded, no sound will be
produced from the subwoofer, even if
“Subwoofer” is set to “Yes.”
• Since subwoofer use is set as the player default
setting, “Subwoofer” cannot be set to “None”
when “Front” is set to “Small.”
• When connecting front speakers that cannot
reproduce adequate low frequencies and a
subwoofer is not connected, set “Front” to
“Large,” and “Subwoofer” to “None.”
◆Distance
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“Front” first (A = 1.0 m to 15.0 m). Then
adjust the values in “Centre” (centre speaker
B
), “Surround” (surround speakers C),
“Surround Back” (surround back speakers
D
), and “Subwoofer” (E) to reflect the
actual distance to your centre speaker,
surround speakers, surround back speakers,
and subwoofer.
Change the “Distance” setting each time you
move the speakers. Start from the front
speakers.
Yes Select this if you connect a
subwoofer to output the
LFE (low frequency effect)
signals from the subwoofer.
None Select this if you do not
connect a subwoofer.
Front Set this between 1.0 metre
and 15.0 metres in 0.2 metre
increments.
(1.0 ~ 3.0 ~ 15.0 [m])
Centre Set this within –1.6 metres
and +0.6 metres of the
“Front” setting in 0.2 metre
increments. For example, if
“Front” is set to 1.6 metres,
“Centre” can be set between
0 metres and 2.2 metres.
(0 ~ 3.0 ~ 15.6 [m])
Surround Set this within –5.0 metres
and +0.6 metres of the
“Front” setting in 0.2 metre
increments. For example, if
“Front” is set to 5.0 metres,
“Surround” can be set
between 0 metres and
5.6 metres.
(0 ~ 3.0 ~ 15.6 [m])
Surround
Back Set this within –5.0 metres
and +0.6 metres of the
“Front” setting in 0.2 metre
increments. For example, if
“Front” is set to 5.0 metres,
“Surround Back” can be set
between 0 metres and
5.6 metres.
(0 ~ 3.0 ~ 15.6 [m])
Subwoofer Set this within –1.6 metres
and +0.6 metres of the
“Front” setting in 0.2 metre
increments. For example, if
“Front” is set to 1.6 metres,
“Subwoofer” can be set
between 0 metres and
2.2 metres.
(0 ~ 3.0 ~ 15.6 [m])