Specialized Speedzone Comp CR2302 - Manual (Page 8)

be reset by pressing the "FUNCTION"
button for three seconds. The resolution
is 0.01 miles (0.01 Kilometers). The
trip distance is shown on the lower line
if the screen. (See figure13)
Odometer (ODO)
The odometer will record the total
distance traveled up to 99,999 miles
or kilometers and then roll to zero. The
odometer can be reset by pressing the
"FUNCTION" button for three seconds.
The total distance is shown on the
lower line if the screen. (See figure 14)
Programmable Odometer
The odometer digits are user settable.
This is convenient for transferring your
hard-earned mileage that is usually
15
Auto Start/Stop Timer (ATM)
The stop watch function will operate only
when there is speed input and records
the actual time spent riding. Pressing the
"FUNCTION" button for 3 seconds will
reset the ATM display to zero.
Timer Mode (TM)
In TM mode the stopwatch function will
operate when the "FUNCTION" button
is pressed. The stopwatch will record
the total time after the button is pressed
regardless of whether there is speed
input or not. The average speed (AVS)
will be calculated based on the time
the timer mode is activated.
Interval Timer (hourglass icon)
The interval timer will display on the
lower line of the screen when the hour-
glass appears on the left. The timer will
indicate you are reaching the end of a
cycle with one beep per second for the
last 5 seconds of an interval. This is
followed by a continuous three-second
beep as the interval timer repeats.
Trip Distance (DST)
Trip distance mode will record up to
999.99 miles or kilometers and then roll
to zero. The trip distance function can
14
FIGURE 12: MAXIMUM SPEED SCREEN FIGURE 13: TRIP DISTANCE SCREEN
FIGURE 14: ODOMETER SCREEN
01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 14