Samsung 152MP - Manual (Page 15)

1. Connect the antenna or the cable box to the TV tuner box using the "ANTENNA" terminal on the
tuner box.
2. Remove the TV Tuner Box cover from the rear of the monitor.
3. Insert the connected tuner box into the slot and firmly tighten the two screws using a coin to lock the
box in place. (Loose screws may cause a blank screen or picture noise)
4. Replace the TV Tuner Box cover.
5. Turn on the monitor.
6. Select TV using Source button among the external signal adjustment buttons.
7. Select a desired TV channel.
As this product is designed for NTSC signals only, you cannot view TV programs in countries
where PAL or SECAM signals are used.
Setup - Connecting to other devices
User's Guide T 15
With a TV tuner box (option), you can watch TV simply by hooking up the monitor to an antenna or to
your cable box. There is no need to buy a TV card which connects to a PC, or additional hardware or
software.
Contact a local Samsung Electronics
service center to buy optional items.
2. Connecting TV (Connect a TV tuner box (option))