Simplicity sw210 - Manual (Page 7)

6
O
1 ALL-PURPOSE PRESSER FOOT - snap-on
Use for most straight and zigzag seams. The needle opening
is rectangular to accommodate the swing of the needle in a
zigzag stitch. (The machine comes with this foot already
attached.)
O
2 BUTTONHOLE PRESSER FOOT - snap-on
Use for sewing made-to-measure buttonholes.
O
3 BUTTON ATTACHING PRESSER FOOT - snap-on
Holds flat buttons secure for machine stitching in place.
O
4 ZIPPER PRESSER FOOT - screw-on
Adjusts to stitch close to either side of the zipper without
catching the zipper coil.
O
5 BLIND HEM FOOT - snap-on
Features an adjustable guide for positioning and evenly
stitching blind hems, topstitching, or edgestitching.
O
6 OPEN TOE SATIN STITCH FOOT - snap-on
Satin stitching glides comfortably under the sole of this
foot and the open toe provides clear visibility of stitches.
O
7 OVERCASTING FOOT - snap-on
A pin on the foot holds fabric flat when overcasting fab-
ric edges. The guide ensures perfect sewing alignment.
O
8
HEMMER FOOT - snap-on
Rolls fabric edge for narrow hemming.
O
9 EMBROIDERY FOOT - screw-on
Prevents fabric from “flagging” or popping when sewing
free-motion techniques.
O
10 CORDING FOOT - snap-on
Grooves on the foot guide lightweight cords under the
stitches for decorative applications.
O
11 BOBBINS
Hold lower thread. These are “Class 15” bobbins.
O
12
SEAM RIPPER
Use to remove stitching and to open buttonholes.
O
13 SCREWDRIVER
Use to loosen and tighten the presser foot thumb screw,
needle clamp screw, and needleplate screw.
O
14 FELT CUSHIONS
Fit on the spool pin beneath the thread spool, stabilizing
the spool and preventing the thread from wrapping
around the spool pin.
O
15 NEEDLES
The most commonly used “universal” needles, size #11,
#14, and #16, are included. This machine uses 15x1
household sewing machine needles.
O
16 VIDEO – NOT PICTURED
Step-by-step instructions on basic operation of machine.
KNOW YOUR SIMPLICITY SEWING MACHINE
ACCESSORIES
The SIMPLICITY sewing machine comes
with the presser feet and accessories you
will need, conveniently stored in the free
arm cover. This low shank machine uses
snap-on or screw-on presser feet.
O
1
O
5
O
2
O
3
O
6
O
4
O
12
O
14
O
7
O
15
O
11
O
8
O
10
O
13
O
9