Samsung CL29Z7H - Manual (Page 12)

1.6 C HAPTER O NE : Y OUR N EW TV
Y
O U R
N
E W
T V
Remote Control
¯ Reset
If your remote control is not func-
tioning properly, take out the bat-
teries and press the reset button
for about 2~3 seconds. Re-insert
the batteries and try using the
remote control again.
˘ Display
Press to see the time, channel,
etc., on-screen. Also press to exit
(quit) the menu system.
¿ Sleep
Press to select a preset time inter-
val for automatic shutoff.
¸ VCR Controls
Stop
Press this button to stop a tape
during play, record, rewind or
fast forward. If the button is
pressed during Full-Automatic
play, the function will be can-
celled.
REW (Rewind)
Press to rewind a tape in your
VCR.
Play/Pause
Press the Play/Pausebutton to
play back prerecorded tapes or
pause the tape.
FF
Press to fast forward the tape in
your VCR.
˛ DNIe
Activates DNIe (Digital Natural
Image engine).
◊ Set
Use this button when you are set-
ting up your remote control to
operate your VCR, Cable box, or
DVD).
± R.surf
Press the R.SURF button to auto-
matically return to a preferred
channel after a user-preset time
delay.
≠ Add/Erase
Press to add or erase channels in
the TV’s memory.
– PIP Controls
Source
Press to select one of the available
signal sources for the PIP window
(i.e., AV1, AV2, AV3).
Still
Press to stop the action during a
particular scene. Press again to
resume normal video.
Note: The still function doesn’t
operate in Component 1, 2 mode.
Locate
Press to move the PIP window to
any of the four corners of the TV
screen.
Swap
Exchanges the video signal that is
currently displayed on the main
screen with the signal in the PIP
window.
Size
Press to make the PIP window
small, large, double screen or
stock ticker window.
CH
Displays the available channels in
sequence (These buttons change
channels in the PIP window only).