Sanyo RM-CD23 - Manual (Page 6)

This set has dual alarms. You may set
Alarm 1, to wake you at a certain time, or
Alarm 2, to wake you at a different time, or
Alarm 1+2 to wake you at both of these
times.
This feature is useful for couples waking up
at different times or a person who likes to
wake up at different times during week days
and weekends or holidays.
To set Alarm 1, slide the Alarm selector to
position 1.
To set Alarm 2, slide the Alarm selector to
position 2.
Press and hold down Alarm Set button and
Forward (or Reverse) button till you reach
the wake up time you want. Pressing Alarm
Set button, Forward(or reverse) button (2 at
once) will quickly advance the time. When
you reach the proper time, release all
buttons.
Ê Set the proper alarm time or check if the pre-set alarm time is correct by pressing the
Alarm set button.
Slide the Mode Switch to ALARM position.
Buzzer will sound at the pre-set alarm time.
Л
М
Н Press the Alarm Off button to furn off the alarm.
К
Л
М
Turn radio on (slide Function switch to RADIO) and adjust the Tuning and Volume control.
Set the proper alarm time or check if the pre-set alarm time is correct by pressing the
Alarm set button.
Slide the Alarm Mode switch to AUTO.
The radio will start playing automatically at the set alarm time. n Note:
Note:
To check alarm time, press Alarm Set
button. The display will show alarm
time.
To wake at Alarm 1 time, slide Alarm
selector to position 1; To wake at
Alarm 2 time, slide Alarm selector to
position 2; To wake at both time, slide
to Alarm 1+2.
When setting time, be careful not to
touch Snooze and/or Sleep button.
Touching these buttons will change
the time.
WAKE TO ALARM
10 9
Ê Press and hold Time Set button.
While holding down Time Set button,
press Forward button or Reverse button
until desired time is displayed.
Л
М Release these buttons when the
desired time is reached.
A green dot (PM Indicator) in the
lower right corner indicates PM time.
This is optional for 12-hour version.
Note:
TO SET CLOCK TIME
Note: When setting time, be careful not to
touch Snooze and/or Sleep button.
Touching these buttons will change
the time.
TO SET ALARM TIME
К
Л
М
Н
Open CD Door by pressing CD Open button and place and center a CD into the CD
compartment.
Slide the Function switch to CD.
Set the proper alarm time or check if the pre-set alarm time is correct by pressing the
Alarm set button.
Slide the Mode switch to AUTO.
The CD will then start playing from the first track at the pre-set alarm time. n
WAKE TO RADIO
WAKE TO CD MUSIC