Woodstock SHOP FOX M1054 - Manual

Model M1054
10" x 18" Metal Cutting Bandsaw
Manual Insert
(For Models Manufactured Since 4/10)
Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz
COPYRIGHT © OCTObeR, 2010 bY WOODSTOCK INTeRNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY be RePRODUCeD IN ANY SHAPe OR FORM WITHOUT
THe WRITTeN APPROVAL OF WOODSTOCK INTeRNATIONAL, INC. Printed in Taiwan #13340Jb
The Model M1054 is the same machine as the Model M1048 except for improvements to the headstock,
belt tension mechanism, vise, and other small changes. The Data Sheet and parts breakdowns in this
insert replace the corresponding sections in the M1048 manual. All other content in the Model M1048
owner's manual applies to this machine. Before operating your new machine, you MUST read and
understand this insert and the entire Model M1048 manual to reduce the risk of injury when using this
machine.
If you have any further questions about this manual insert or the differences between the Model M1054
and the Model M1048, contact Technical Support at (360) 734-3482 or email [email protected].