Homes with intercom systems, Telephone and final installation procedures, Ds 800 only – Sonic Alert DS 800 User Manual
Page 2: Ds 80 only, Installation diagram ds 800/80, Sonic alert’s limited warranty
HOMES WITH INTERCOM SYSTEMS
The DS 800 / 80 will work with most intercom systems. For this feature the optional DS 800T Sensor is required.
PART 2
TELEPHONE AND FINAL INSTALLATION PROCEDURES
After the wires have been connected to your signaler, the DS 800/80 is almost ready for use.
1. Plug the DS 800/80 into the 120-volt outlet and plug the telephone cord into a nearby modular telephone jack. Plug any
incandescent lamp into the outlet on the side of the DS 800/80, (MAXIMUM 300 WATTS). Be sure that the lamp is in the
"On" position. The light will stay off until the signaler is activated.
3. You must be careful when plugging the DS 800/80 into the electrical wall outlet. If the outlet cover plate is metal, the screws
on the back of the DS 800/80 may touch the plate. This is not dangerous and will not damage the DS 800/80 but it will cause
the lights to flash. To prevent this, simply replace the metal cover plate with a plastic cover or put a piece of electrical tape over
the screws on the back of the DS 800/80.
FLASHING LIGHTS IN OTHER ROOMS
DS 800 only
To flash lights in other rooms, you can use remote receivers, models SA 101, SA 201, BL 300, RH 100 and Sonic Boom Alarm
Clock as needed. They simply plug into any electrical outlet in the room that you want to be alerted. Be sure your lamp is in the
“ON” position if using a lamp with a receiver.
DS 80 only
The DS 80 does not send a signal to remote receivers. This model is best used in studio apartments and dorm rooms that will
only need one light for signaling.
If you need technical assistance installing the DS 800/80, please call your local Dealer or Sonic Alert for assistance.
1-248-577-5400 or e-mail us at
Rev. 1.0
Installation Diagram DS 800/80
SONIC ALERT’S LIMITED WARRANTY
The Deluxe Wired Doorbell, Telephone & Intercom Signaler Model DS800 is warranted against manufacturing
defects in materials and workmanship for (5) years from the date of purchase. Within this period Sonic Alert will
repair or replace at our option the DS800 without charge for parts and labor. Simply send the DS800 (postpaid)
and a copy of your sales slip as proof of purchase to: Sonic Alert Inc., Attn: Repairs 1050 E. Maple Rd., Troy MI
48083
1-248-577-5400