Sprint Nextel SANYO SCP-3200 - Manual (Page 154)

138 Section 2H: Using Your Phone’s Voice Services
Setting Up Screen Call
This feature enables you to screen incoming calls by using a
recorded announcement, either one that is prerecorded or
one that you record. You can also record the caller’s message
into the Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
ᮣ
When the phone rings or vibrates, press Options (right
softkey) >Screen Call.
To set Auto Screen Call:
1. Select >Tools > Voice Memo > Screen Call > Auto.
2. Select On and press .
3. Set the answer delay by using numeric keys or by
pressing the navigation key up or down.
4. Press or OK (left softkey). (The icon is displayed on
the standby display.)
Selecting an Announcement for Screen Call
To select a Screen Call announcement:
1. Select >Tools > Voice Memo > Screen Call >
Announcement.
2. Depending on your preference, select Pre-Recorded or
Custom.
Tip: While the caller’s message is being recorded, press TALK to
answer the call, or press END to stop recording and disconnect
the call.