Seidio RBT-1000 - Manual (Page 2)

English 2
LED Display
Front View
1 Yellow LED indicates power is in charging
2 Blinking red LED indicates low power
3 Blinking Green LED indicates position is fixed
4 Blinking Blue LED indicates Bluetooth is connected
Getting Started
STEP 1: Charge the Battery
Before you use RBT-1000, the battery must be charged for at least four hours.
As RBT-1000 is in charging, the Yellow LED will be lighted up. When the
battery is fully charged, the Yellow LED will be turned off.
STEP 2: Turn on Receiver and wait for GPS fix
If the position has not been fixed yet, the Green LED will be still. If the position
has been fixed, the Green LED will be blinking.
STEP 3: Connect to Bluetooth-enabled handheld device
1. From your Bluetooth-enabled handheld device, execute Bluetooth
application software to search RBT-1000 and then connect it to your
Battery Status GPS Status Bluetooth Status
1 2 3 4