Smeg SCB80GX - Manual (Page 20)

Instruction for the user
22
9 DIGITAL TIMER (CERTAIN MODELS ONLY)
This component allows an on-off beeper to be set to indicate the end of the cooking time. It is
therefore just a timer, with no programming functions.
LIST OF FUNCTIONS
TIME-SETTING BUTTON
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
9.1.1 Setting the time
When the oven is used for the first time, or after a power blackout, the display flashes on and off at
regular intervals showing . Press the key and use the or keys to set the current
time.
9.1.2 Setting the timer
To set the timer, press the
key and keep it pressed until the required number of minutes is shown.
When the key is released, after 5 seconds the countdown will start; once this finishes, an
acoustic device will sound.
During the countdown the display will show the symbol; pressing the key displays the current
time for 5 seconds.
9.1.3 Deactivating the acoustic device
The acoustic device stops sounding automatically after seven minutes. It can be deactivated in
manual mode by pressing the key.
9.1.4 Adjusting the volume of the acoustic device
The volume can be adjusted (3 settings) while it is in operation by pressing the key.
9.1.5 Modifying the data set
The timer data set can be modified at any moment by pressing the
or keys.
10 ANALOGUE CLOCK (ONLY ON EQUIPPED MODELS)
The mechanical timer is set by turning the knob clockwise.
The timer can be set from 0 to 55 minutes. At the end of the cooking time, an
alarm signal will be heard: to stop the alarm turn the external part of the knob to
position .
The clock is set by pulling the knob and turning it clockwise.