Sharp XG-PH70X - Manual (Page 18)

-16
Note
• All the buttons on the remote control, except the mouse/adjustment button and the ADJ./MOUSE switch,
are made of luminous material that is visible in the dark. Visibility will diminish over time. Exposure to light
will recharge the luminous buttons.
Remote Control
40
18
37
56
39
40
45
70
18
48
37
47
19
41
46
50
46
46
50
47
STANDBY button
For putting the projector into
standby mode.
ZOOM buttons
For adjusting the projected
image size.
KEYSTONE button
For entering the Keystone
Correction mode.
ENLARGE (enlarge/reduce)
buttons
For enlarging/reducing part of the
image.
INPUT 1, 2, 3, 4 and 5 buttons
For switching to the respective
input modes.
AUTO SYNC button
For automatically adjusting images
when connected to a computer.
BREAK TIMER button
For setting the break time.
L-click button
For the left click while the
ADJ./MOUSE switch is the
MOUSE position.
FOCUS buttons
For bringing the projected image
into focus.
Mouse/adjustment button
(
' / " / \ / |)
• For moving the computer
cursor while the
ADJ./MOUSE switch is the
MOUSE position.
• For selecting menu items
while the ADJ./MOUSE
switch is the ADJ. position.
ENTER button
For setting items selected or
adjusted on the menu.
FREEZE button
For freezing images.
RESIZE button
For switching the screen size.
BLACK SCREEN button
For temporarily display the black
screen.
PICTURE MODE button
For switching the picture mode.
WIRED R/C JACK
For connecting the remote control
to the projector when the signals
from the remote control cannot
reach the remote control sensor.
Volume buttons
For adjusting the speaker sound level.
MUTE button
For temporarily turning off the
sound.
R-click/UNDO button
• For the right click while the
ADJ./MOUSE switch is the
MOUSE position.
• For undoing an operation or
returning to the previous
display while the ADJ./MOUSE
switch is the ADJ. position.
MENU button
For displaying adjustment and
setting screens.
ON button
For turning the power on.
ADJ./MOUSE switch
For switching the remote control
modes.
H & V LENS SHIFT button
For shifting the lens horizontally
and vertically.
19·56
19·56
Numbers in refer to the main pages in this operation manual where the topic is explained.
Part Names and Functions