Samsung D-44867 User Manual
Page 169
155
Web a
n
d
Dat
a
To turn Wi-Fi off:
1.
Press
>
>
>
Wireless & networks > Wi-Fi settings > Wi-Fi
.
2.
Tap to remove the green checkmark and
deactivate Wi-Fi.
To connect to a Wi-Fi network:
1.
Press
>
>
>
Wireless & networks > Wi-Fi settings.
Ⅲ
The network names and security settings (Open
network or Secured with xxx) of detected Wi-Fi
networks are displayed in the Wi-Fi networks
section.
2.
To manually add your new network connection:
Ⅲ
Touch
Add Wi-Fi network
.
Ⅲ
Enter the Network SSID. This is the name of your
Wi-Fi network.
Ⅲ
Tap the
Security
field and select a security option.
This must match the current security setting on
your target network.
Ⅲ
If secured, you will also need to enter the wireless
password. The
show password
option, reveals the
password as you type it instead of showing only
asterisks (****).
Ⅲ
Tap
Save
to store the new information and
connect to the Wi-Fi network.
To manually scan for a Wi-Fi network:
1.
Press
>
>
>
Wireless & networks > Wi-Fi settings.
2.
Press
and tap
Scan
.
Note:
Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery
and reduce your use times.
Note:
When you select an open network, you will be
automatically connected to the network.
Note:
The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the wireless password again, unless
you reset your device back to its factory default settings.
SPH-D600.book Page 155 Thursday, June 9, 2011 10:33 AM