Samsung D-44867 - Manual (Page 123)

2G. Voice Services 109
V
o
ice Ser
vices
2. When you see
“
Listening ,” say “ Open .”
A list of valid actions is
displayed.
3. Tap an option to open
the selected menu.
Text-to-Speech
Allows the device to provide a verbal readout of
onscreen data such as messages and incoming caller
information (based on Caller ID).
Text-to-Speech Settings
1. Press > > >
Voice input & output > Text-to-speech settings .
2. Configure the available options to alter the settings
associated with this feature.
Ⅲ Listen to an example plays a short example of
what the text-to-speech feature will sound like on
your device when activated.
Ⅲ Always use my settings overrides any conflicting
application settings with those you set up within
this text-to-speech settings screen. If enabled and
available as a feature, your device will default to
using the text-to-speech feature.
Ⅲ Default Engine sets the speech synthesis engine
used for the spoken text. Default is Pico TTS .
Ⅲ Install voice data confirms the installation of
necessary data required for voice synthesis. Tap
this to download and install the free app from
Android market.
Ⅲ Speech rate adjusts the rate at which onscreen
text is spoken by the device. Choose from: Very
slow , Slow , Normal , Fast , and Very fast .
Tip: You can also say
"
Open " and the name of
the item you want to
open. You will see the
item displayed. Tap
OK
to open it.
Important: Before initial use, activate the Install voice data
function to properly activate and use the
text-to-speech feature.
SPH-D600.book Page 109 Thursday, June 9, 2011 10:33 AM