SMC Networks SMC8014W-G - Manual (Page 33)

7. When your configuration is complete, click the [Apply] button to save your changes and
return to the main Access Control page.
Special Application
Some applications, such as Internet gaming, videoconferencing, Internet telephony, and others
require multiple connections. Rules are based on the port or range of ports that the
application sends data to the server on (destination port). When the Gateway sees traffic sent
to the configured port(s), it dynamically allows all incoming traffic from the server on any port
for the specified time.
To access the Special Application configuration page, on the Side Navigation bar, click on
[Firewall] link and then click on the [Special Application] link.
To enable this option, click the [Enable Triggering] checkbox.
To configure a Special Application Rule, follow the steps outlined below:
1. On the Side Navigation bar, click on [Firewall] then select [Special Application]
2. Click on the [Add] button on the Special Application page to access the [Trigger]
configuration section.
3. Enter in the [Name] that you want to use for this rule.
4. In the [Type] pull-down menu, select the data/traffic type that this rule will apply to.
The options are TCP | UDP.
5. Configure the [Port Number] that your application will be using as the outgoing trigger
ports.