Samsung AH68-01720S - Manual (Page 61)

2 1
4 3
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
In Stop mode,
press
MENU
button.
Press Cursor
button to move to
‘Audio’ and then
press
ENTER button.
In the Speaker
Setup, press the
ENTER button again.
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press
ENTER button.
• For C, SL, and SR, each time the button
is pressed, the mode switches
alternately as follows: SMALL
➝ NONE.
• For L and R, the mode is set to SMALL.
59
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
• Depending on PRO LOGIC and STEREO settings, the speaker mode
may vary (see page 67).
Note
49P~84P(P1200)-SECA GB 6/22/05 6:57 PM Page 60