Inputs, relay outputs, and power status, Capturing external events, Analog inputs – Sierra Wireless PINPOINT X HSUPA User Manual

Page 32

Advertising
background image

Rev 4.0 Oct.09

26

5

5: Inputs, Relay Outputs, and Power
Status

Capturing External

Events

Power Modes and

Information

The PinPoint X has special features for use in a mobile  
environment. The PinPoint X can be configured to monitor the 
input, respond to specific types of events, and even trigger a 
digital output. The PinPoint X can also be configured to change 
its power mode in order to conserve power. These features can 
be configured to your needs.

Capturing External Events

The PinPoint X is equipped with an I/O port interface which 
includes 4 digital inputs, 4 analog inputs, and 2 relay outputs. 
These may be connected to sensors and switches to monitor 
vehicle status and remotely control equipment.

Figure 5-1: PinPoint X I/O port

Analog Inputs

The analog inputs will report a specific voltage ranging from 0 
to 30 in increments of 0.03 volts. This allows a fine degree of 
monitoring for a scaling device.

Monitoring a voltage or power usage. 

Monitoring an oscilloscope. 

Monitoring temperature. 

Monitoring an incremental gauge. 

Monitoring an internal fan. 

Monitoring a vehicle payload.

Monitoring the elevation of a tow bar.

Monitoring a vehicle’s battery use.

Advertising