SMC Networks SMC Barricade SMC7004VBR - Manual (Page 92)

S
ETTING
U
P
TCP/IP
TO
W
ORK WITH THE
B
ARRICADE
5-28
2. In the “Command Prompt” window, type “IPCONFIG /RELEASE”
and press the <ENTER> key.
3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify
that your IP address is now 192.168.2.xxx (2-255), your Subnet Mask is
255.255.255.0 and your Default Gateway is 192.168.2.1. These values
confirm that your Barricade is functioning.
4. Type “EXIT” and press <ENTER> to close the “Command Prompt”
window.