Sears KS-2 - Manual (Page 25)

switches on the flash unit. See the users manual of the flash
unit]
4. Turn the flash unit's power source switch on, and when the flash is
fully charged, the Flash Ready red LED Light will light up and the
Shutter Speed Indicator will show 1/125 sec. and change
automatically to the synchronizing speed.
5. Press the Shutter Release Button and shoot.
* For further details. please refer to the instructions with the flash
unit.
* Do not use other makes of flash units that have special signal pins
exclusively for their cameras. as this will result in incorrect
exposure and may damage the circuitry of the camera.
* If the Shutter Release Button is pressed before the Flash Ready LED
Light lights up, the shutter speed will be the one indicated by the
Shutter Speed Indicator.
[NOTE: Mike B. - Wait for the ready light or you will get underexposed
and most likely extremely blurry images as the shutter will remain
open in the dim light.]
17. FLASH PHOTOGRAPHY
www.orphancameras.com